Adam Audio A44H 4" Active Studio Monitor
Adam Audio A44H 4" Active Studio Monitor Overview:
The A44H offers a low-profile alternative to the A Series A7V while delivering similar performance characteristics.
High Standards Low Profile
With a 19-inch width the horizontally oriented A44H can sit on a standard rack shelf or be mounted above or below a display. The completely new design also enables the A44H to serve as a center speaker in immersive and 3D speaker configurations.
Dual 4-inch long-throw woofers and the X-ART tweeter deliver a wide frequency range while onboard DSP-based tuning capabilities enable you to tweak the sound easily.
Features
. German Handmade Precision X-ART Tweeter with rotatable HPS waveguide
. 2 x 4'' Woofer (Multi-Layer Mineral)
. Cumulated Amp. Power Peak: 130 W
. Frequency Response @ -6 dB: 46 Hz – 45 kHz
. Max. peak SPL per speaker at 1 m: 103 dB SPL
Future Proof Innovations
Explore The Technology
. ADAM Audio monitors have earned a worldwide reputation for the innovations that we have established in the field of loudspeaker technology. Here you can explore the technology of the A44H.
A Control Remote Software
. The DSP-based functionality of all A Series monitors can be controlled remotely and in real time over ethernet using A Control.
Rotatable HPS Waveguide & X-Art Tweeter
. Made from a new glass fiber polymer compound the HPS waveguide enables the X-ART tweeter to disperse sound in space with controlled consistency.
Bass Reflex System Cabinets And Mounting
. The new A Series cabinets build on the heritage of ADAM Audio and the AX Series in particular.
Automated Room Correction With Sonarworks
. ADAM Audio is proud to partner with Sonarworks on an automated room correction solution that runs directly on the DSP of A Series monitors.
Specifications
Acoustics
. Frequency Response: @ -3 dB: 49 Hz – 41 kHz
. Frequency Response: @ -6 dB: 46 Hz – 45 kHz
. Max. peak SPL per speaker at 1 m (sine bursts): 103 dB SPL
. Max. peak SPL per speaker at 1 m (IEC-weighted noise): 110 dB SPL
. Crossover Frequencies: 2.4 kHz
Drivers
Woofer
. Basket Diameter: 2 x 4"
. Voice Coil Diameter: 1" (25 mm)
. Cone Material: MLM
Tweeter
. Type: X-ART
. Diaphragm Area: 4 inch² (2420 mm²)
. Equivalent Diaphragm Diameter: 2" (56 mm)
. Velocity Transform Ratio: 4 to 1
. Diaphragm Weight: 0.17 g
. Waveguide: HPS (rotatable)
. Waveguide Dispersion: 120° horizontal 70° vertical
. Amplification
Woofer
. Amplifier Type: PWM
. Peak (10% THD limiter deactivated): 110 W
. RMS (1% THD limiter deactivated): 90 W
Tweeter
. Amplifier Type: Class A/B
. Peak (10% THD limiter deactivated): 20 W
. RMS (1% THD limiter deactivated): 15 W
Signal Processing
. AD converter: 24-bit
. Internal sample rate: 96 kHz
. Delay range resolution: 0 – 10 ms 0.1 ms
. Protection: Independent peak and thermo limiters for each driver and amplifier thermo limiters
Audio Input Connectors
. Analog: XLR RCA
. Input Impedance: 9 kOhm / 3.3 kOhm
. Max. Input Level: +19 dBu
Control Options [via Network]
. Networking Connector: RJ45
. Connection Type: Ethernet
. Communication Protocol: OCA using standard IP data
. Control Software: A Control (Windows and MacOS available)
. Room Adaption Options: Backplate Extended Sonarworks SoundID Reference integration
. Advanced Room Adaptation: 6 x PEQ Level Delay
. Third-party Calibration Compatibility: Import from Sonarworks SoundID Reference
Control Options [via Backplate]
. Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level setting
. Level: -12 dB to +12 dB
. Input Selection: Balanced unbalanced
. Voicings: Pure UNR
. Room Adaption:
. Bass: +2 0 -2 -4 dB
. Desk: 0 -2 -4 dB
. Presence: +1 0 -1 dB
. Treble: +1.5 0 -1.5 dB
General Data
. Display: Front panel multi-colour LED
. Cabinet Design: Dual front ported
. Cabinet Material: Vinyl wrapped MDF and painted MDF front panel
. Mounting options: Threaded inserts on the bottom of the cabinet (4 x M8)
. Power consumption (max idle sleep): 220 W 10 W 3.5 W
. AC Input Voltage: 100 – 240 V 50/60 Hz
. Power Rating: 300 W max.
. Operating Conditions: -10° C to +40° C (+14° F to +104° F); <75 % RH non-condensing
. Weight: 9.7 kg (21 lbs 6 oz)
. Dimensions (Height x Width x Depth): 135 mm x 432 mm x 350 mm (5 3/8" x 17" x 13 3/4")