ADAM Audio Sub10 MK2 - 300W 10-Inch Subwoofer
ADAM Audio Sub10 MK2 - 300W 10-Inch Subwoofer Overview:
The Sub10 MK2 is a powerful subwoofer designed to extend the low frequency capabilities of any near or midfield monitoring system down to 25Hz.
A sturdy special woofer with extended cone travel and a heavy-duty coil have been optimized for accurate reproduction from a bass reflex enclosure. The down-firing bass reflex tube avoids intrusive ventilation noise because of its generous size and shape. The PWM amplifier produces over 90% efficiency and can handle critical passages without overheating for long periods of time. An additional output allows you to cascade as many subwoofers as needed.
The Sub10 MK2 subwoofer provides a precise combination of low cutoff frequency (-3 dB at 25Hz) and an undistorted high sound pressure level (113dB at 1m).
. 10“ Subwoofer (paper)
. Amp. Power RMS / Music: 200 W / 300
. Frequency response: 25 Hz - 150 Hz
. Max. peak SPL at 1 m: ≥113 db
FEATURES & BENEFITS
Linear bass reproduction down to 25 Hz
. Ideal addition to nearfield and midfield monitors
Maximum Peak sound pressure in 1 m ≥ 113 dB
. Powerful, compression-free sound reproduction even at very high sound levels
High efficiency PWM amplifier
. Low-distortion amplification at both low and high volume levels
Special 10" woofer with paper diaphragm
. Unrestricted bass reproduction for low-fatigue operation even at high volumes
Easy manual or automatic (de-)activation
. If desired, monitoring is possible without the low frequencies
According to downward working bass reflex tube with generous dimensions and corresponding rounding
. Prevention of air turbulence noise
Upper cut-off frequency is selectable between 50 - 150 Hz
. Allows optimal adaptation of the total system on the bass performance of the satellites
Connectable high-pass filter for the satellite outputs, which blocks signals below 85 Hz
. Dolby- Fair reproduction of film sound
. Discharging the satellites from the low frequencies